Ricoh ft5035 User Manual page 163

REMARKS
20-bin Multi-position Sorter Stapler (Option)
To avoid problems caused by curly copies, try turning over the paper stack in the
500-sheet or large capacity tray. If there is no improvement, change to copy
paper with less curl.
20-bin Sorter Stapler (Option)
To avoid problems caused by curly copies, try turning over the paper stack in the
500-sheet or large capacity tray. If there is no improvement, change to copy
paper with less curl.
10-bin Sorter Stapler (Option)
To avoid problems caused by curly copies, try turning over the paper stack in the
500-sheet or large capacity tray. If there is no improvement, change to copy
paper with less curl.
If you stack translucent paper or 52 g/m
Stack mode), we recommend that the paper grain be oriented with the paper
path.
If copies are curled in the Sort or Stack mode, cancel Sort or Stack mode. Stack
copies in the proof tray.
20-bin Sorter (Option)
To avoid problems caused by curly copies, try turning over the paper stack in the
500-sheet or large capacity tray. If there is no improvement, change to copy
paper with less curl.
Whenever an OHP transparency is delivered to the proof tray, it should be taken
out right away. (It is not necessary to do this when you use the OHP Slip Sheet
mode.)
If copies smaller than B5 fed
them from the bins.
160
2 paper in the proof tray (not in Sort or
;
are not stacked well, arrange them after taking