Ricoh ft5035 User Manual page 8

1. Operation panel
2. Left scale
3. Platen cover
(option in some areas)
4. Exposure glass
5. Bypass feed table
6. 1000-sheet large
capacity tray
7. Key counter holder
8. Front cover
9. 500-sheet tray
*10. 500-sheet tray
*11. Unit for two-sided
copying
12. Main switch
13. Copy tray
14. Toner Bottle
15. Fusing Unit
Operator controls and indicators are located here.
Use to align originals on the exposure glass.
Lower this cover over originals for copying.
Position originals here face down for copying.
Use to copy onto OHP sheets, adhesive labels,
translucent paper, post cards, and special size
paper.
This tray can hold 1,000 sheets of copy paper.
Two of three models have this tray. (
2.)
Insert the optional key counter here.
Open to access the inside of the copier.
This tray can hold 500 sheets of copy paper.
This tray can hold 500 sheets of copy paper. The
model with a unit for two-sided copying does not
have this tray. Instead, it has the unit for two-
sided copying (*11).
This unit is used to make two-sided copies.
Switches the copier between on and stand-by
conditions. ("stand-by" means that the anticon-
densation heaters are on.)
Completed copies are delivered here.
Replace the toner bottle when the
indicator is lit or blinking.
Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
COPIER EXTERIOR AND INTERIOR
See page
Add Toner
5