Ip Optimization - CalAmp Viper 100 User Manual

Multicast Forwarding
This parameter controls the forwarding of multicast packets between the LAN interface and the RF interface. The packets
forwarded from the LAN to the RF interface are identified by the "Multicast Address List" (all other multicast packets are
dropped). The "Multicast White List" controls which multicast packets are forwarded from the RF interface to the LAN
interface. When the "Multicast White List" is empty, all multicast packets received from the RF interface are forwarded to
the LAN interface; otherwise, only the multicast packets identified in the white list are forwarded to the LAN.
Enabled
Disabled
Multicast to Broadcast (LAN to RF)
When a multicast packet is forwarded from the LAN interface to the RF interface, the destination IP address can be changed
to the broadcast IP address (255.255.255.255)
Enabled
Disabled
Multicast to Broadcast (RF to LAN)
When a multicast packet is forwarded from the RF interface to the LAN interface, the destination IP address can be changed
to the broadcast IP address (255.255.255.255)
Enabled
Disabled
4.4.3.2.1 MULTICAST ADDRESS LIST
All packets received from the LAN interface with a multicast destination IP address matching one of the multicast address
identified in this list will be forwarded from the LAN interface to the RF interface.
4.4.3.2.2 MULTICAST WHITE LIST
All packets received from the RF interface with a multicast destination IP address matching one of the multicast address
identified in this list will be forwarded from the RF interface to the LAN interface. If this list is empty, any packet received
from the RF interface with a multicast destination IP address will be passed over the LAN. If this list is non-empty, any
packet received from the RF interface with a multicast destination IP address that does not match an entry in this list will be
dropped.

4.4.4 IP OPTIMIZATION

- Forwarding of multicast packets is enabled (default).
- Forwarding of multicast packets is disabled.
- Conversion of the destination IP address from multicast to broadcast is enabled.
- Conversion of the destination IP address from multicast to broadcast is disabled (default).
- Conversion of the destination IP address from multicast to broadcast is enabled.
- Conversion of the destination IP address from multicast to broadcast is disabled (default).
001-5008-000_Rev12e.docx |
#9 Viper_SC_Manual_ Page 57