Physical Description; Chassis Dimensions; Led Panel - CalAmp Viper 100 User Manual

1.3

PHYSICAL DESCRIPTION

Viper consists of two logic PCBs, one that includes the modem circuitry and the other the radio module. Both are installed
in a cast aluminum case. The unit is not hermetically sealed and should be mounted in a suitable enclosure when dust,
moisture, and/or a corrosive atmosphere are anticipated.

1.3.1 CHASSIS DIMENSIONS

Figure 1 shows the dimensions of the chassis and mounting plate.
Figure 1 – Chassis and Mounting Plate
The equipment is intended for installation only in a RESTRICTED ACCESS LOCATION per EN60950-1:2006

1.3.2 LED PANEL

There are five (5) Tri-Color LEDs. Their functionality is shown in Table 1.
Table 1 – LED Functionality
LED Color
Power Green
Red
Status Green
Blinking Green
Red
Amber (Solid or Blinking)
Definition
Viper SC ready, normal operations
Viper SC hardware fault
Viper SC no faults, normal operations
Viper SC scanning for neighbors
Viper SC has a fault condition, check unit status
Viper SC detects high background noise
#9 Viper_SC_Manual_
001-5008-000_Rev12e.docx |
Page 2