CalAmp Viper 100 User Manual page 2

REVISION HISTORY
REV DATE
REV 0 Jan 2008
REV 1 May 2008
REV 2 Sept 2008
REV 3 Dec 2008
REV 4 Apr 2009
REV 5 Jul 2009
REV 6 Sept 2009
REV 7 Nov 2009
REV 8 Jun 2010
REV 9 Sept 2010
REV 10 Aug 2011
REV 11 Aug 2011
REV 12a July 2013
DESCRIPTION
Initial Release as 001-5008-000.
Update Dual Port Viper SC information.
Added information about SNMP. Updated Firmware Upgrade instructions.
Added information about TCP Client Server Mode. Added information about
Saving/Restoring User Configuration files.
Added information about V1.5 Viper SC code release. Added information about TCP Proxy
Feature. Added note to RF Acknowledgment section. Corrected Viper SC Power Cable Part
in Accessory Table. Added specifications and part number for 900 MHz Viper SC. Updated
RF Exposure Compliance requirements. Added Choosing an IP Addressing Scheme
Added information about V1.6 Viper SC code release. Added information about Listen
Before Transmit Disable feature. Added section about RF MAC override feature. Added
section about the Periodic Reset feature. Added screen shot and information for the "Add
Static Entry" function
Added Listen Before Transmit Disable Feature. (Previously Read: Added Listen Before Talk
Disable Feature).
Updated user manual for product name change from ViPR to Viper SC
Added UL information. Added information and specifications for Viper SC-200. Added
information about V1.7 Viper SC firmware Release. Corrected radio firmware upgrade
command line instructions errors in Section 13.3 that were introduced in revision 7 of the
user manual. Added section about VPN. Added section about Radius. Updated SNMP
section. Updated screen captures and descriptions
Rebranded for Viper SC, Updates to Security – VPN Section 4.5.3.
Added VHF ETSI Viper Part Numbers and ETSI Base Station part numbers (Section 1.5).
Added sensitivity numbers for VHF ETSI Viper (Appendix A). Added additional regulatory
certifications for VHF ETSI Viper (Appendix B).
Updated VHF ETSI frequencies from 136-174 to 142-174MHz.
Added frequency ranges for ETSI and AS/NZ compliant models in section 1.2.
Rearranged model number layout in Appendix A.
Added standards information to Appendix B.
Updated RF Exposure Compliance Recommendations.
Updated Unit Identification and Status mode selection, section 4.1.1.
Updated Diagnostics Info – SNR from RF-MAC, section 4.1.2.
Channel Table/Current Settings mode selection changed, section 4.3.3.
Multicast section updated, section 4.4.3.
IP Optimization updates, section 4.4.4.
VPN Configuration updates, section 4.5.3.
Remote Statistics added, section 4.6.3.
SINAD Meter added to RF Tests, section 4.7.5.
Wing Commander pages added, section 4.7.6.
Updated EU and EFTA Member States' Acceptable Frequency Table in Appendix B.
Add ViperSC+ Model Numbers