CalAmp Viper 100 User Manual page 61

Figure 41 shows the Private Network 192.168.205.0 being protected from the Public Network 172.31.5.0. Viper (1) NAT Eth
interface is enabled and Viper (2) NAT is disabled. The Host 172.31.5.2 cannot send packets directly to the Private Network
because it is hidden. In this example, Host 172.31.5.2 thinks the IP packets are coming from 10.0.14.203.
Figure 41 – Port 2000 is redirected to 192.168.205.125:23
001-5008-000_Rev12e.docx |
#9 Viper_SC_Manual_ Page 54