Product Warranty; Models And Availability - CalAmp Viper 100 User Manual

The White Enable line must be tied to the red positive lead of the connector for the Viper SC to function.
WARNING – EXPLOSION HAZARD- Do not disconnect unless power has been removed or the area is known to
be non-hazardous
1.3.3.4 ANTENNA CONNECTOR
Standard Viper models have a 50-ohm TNC female antenna connector. This connection functions for both transmit and
receive. Dual-Port models feature a 50-ohm TNC female antenna connector functioning for transmit (only) and a 50-ohm
SMA female antenna connector functioning for receive (only). The separate receive antenna connector is ideal for
applications that require additional receive filtering, external PA(s) and other options.
Warning: The transmit antenna port must not be connected directly to the receive antenna port of the Dual-Port Viper SC.
Excessive power into the receive antenna port will damage the radio. Input power to the receiver should not exceed 17 dBm
(50mW).
To reduce potential interference, the antenna type and its gain should be chosen to ensure the effective isotropic radiated
power (EIRP) is not more than required for successful communication.
WARNING – EXPLOSION HAZARD- Do not disconnect unless power has been removed or the area is known to
be non-hazardous
WARNING -EXPLOSION HAZARD-Substitution of components may impair suitability for Class I, Division 2.
The unit must be powered with a Listed Class 2 or LPS power supply or equivalent.
The antenna connector is for connection to antennas housed inside of a suitable enclosure.
1.4

PRODUCT WARRANTY

It is our guarantee that every Viper SC Radio modem will be free from physical defects in material and workmanship for
ONE YEAR from the date of purchase when used within the limits set forth in APPENDIX A – SPECIFICATIONS. The
manufacturer's warranty statement is available in APPENDIX C – PRODUCT WARRANTY.
If the product proves defective during the warranty period, contact our Customer Service Department at (800) 992-7774 to
obtain a Return Material Authorization (RMA). BE SURE TO HAVE THE EQUIPMENT MODEL, SERIAL NUMBER, AND BILLING
& SHIPPING ADDRESSES AVAILABLE WHEN CALLING. You may also request an RMA number online at www.calamp.com.
1.5

MODELS AND AVAILABILITY

Viper SC is available in various models. Each is available with a range features, kits, and accessories. Refer to Table 5 for
product availability and ordering information. Refer to Table 6 for Viper SC antenna and antenna kits and Table 7 for Viper
SC accessories.
Table 5 – Viper SC Order Information
Model Number Frequency Range
140-5018-502 136 - 174 MHz
140-5018-503 136 - 174 MHz
Description
Viper SC-100
Viper SC-100 (Dual Port)
#9 Viper_SC_Manual_
001-5008-000_Rev12e.docx |
Page 5