Environmental Standard Compliance; Resistibility Requirements Compliance; Acoustic Noise Emission Standard Compliance; Electrical Safety Guidelines - Nokia 7368 Product Manual

ETSI CPE safety guidelines
2.2.3
2.2.4
2.2.5

2.3 Electrical safety guidelines

2.3.1
20

Environmental standard compliance

The CPE equipment complies with the EN 300 019 European environmental
standards.

Resistibility requirements compliance

The CPE equipment complies with the requirements of ITU Recommendation K.21
for resistibility of telecommunication equipment installed in customer premises to
over voltage and overcurrents.

Acoustic noise emission standard compliance

The CPE equipment complies with EN 300 753 acoustic noise emission limit and test
methods.
This section provides the electrical safety guidelines for the CPE equipment.
Note 1 —
Code. However, local electrical authorities have jurisdiction
when there are differences between the local and U.S.
standards.
Note 2 —

Power supplies

The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
3FE-46615-AAAA-TCZZA
The CPEs comply with the U.S. National Electrical
The CPEs comply with BS EN 61140.
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01