Etsi Environmental And Crohs Guidelines; Environmental Labels; Overview; Environmental Related Labels - Nokia 7368 Product Manual

7368 ISAM CPE A-240Z-A Product Guide
3 ETSI environmental and CRoHS

3.1 Environmental labels

3.1.1
3.1.2
3.1.2.1
Issue: 01
guidelines
This chapter provides information about the ETSI environmental China Restriction of
Hazardous Substances (CRoHS) regulations that govern the installation and
operation of CPEs. This chapter also includes environmental operation parameters
of general interest.
This section describes the environmental instructions that are provided with the
customer documentation, equipment, and location where the equipment resides.

Overview

CRoHS is applicable to Electronic Information Products (EIP) manufactured or sold
and imported in the territory of the mainland of the People's Republic of China. EIP
refers to products and their accessories manufactured by using electronic
information technology, including electronic communications products and such
subcomponents as batteries and cables.

Environmental related labels

Environmental labels are located on appropriate equipment. The following are
sample labels.
Products below Maximum Concentration Value
(MCV) label
Figure 2 shows the label that indicates a product is below the maximum
concentration value, as defined by standard SJ/T11363-2006 (Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information
Products). Products with this label are recyclable. The label may be found in this
documentation or on the product.
3FE-46615-AAAA-TCZZA

ETSI environmental and CRoHS guidelines

23