A-240Z-A Leds; Figure 8 A-240Z-A Cpe Leds; Table 7 A-240Z-A Cpe Leds - Nokia 7368 Product Manual

A-240Z-A unit data sheet

5.5 A-240Z-A LEDs

Figure 8 A-240Z-A CPE LEDs
Power
Table 7 A-240Z-A CPE LEDs
Indicator LED color and
behavior
Power Green solid
Off
Red solid (default
until software is
running)
INTERNET Green solid
Green flashing
Off
LAN 1 to 4 Green solid
Green flashing
Off
(1 of 2)
42
Figure 8 shows the A-240Z-A CPE LEDs.
Internet LAN 1 to 4
POWER INTERNET LAN1 LAN2
Table 7 provides LED descriptions for A-240Z-A CPEs.
LED behavior description
Power on
Power off
CPE is operating on battery power, or light failed on startup (for example corrupt flash), or self test
failed on startup, or self test failed during regular operation.
HSI WAN is connected: a) the device has an IP address assigned from IPCP, DHCP, or static, and
no traffic has been detected; b) the session is dropped due to idle timeout but the PON link is still
present.
PPPoE or DHCP connection in progress
HSI WAN is not connected: a) there is no physical interface connection; b) the device is in bridged
mode without an assigned IP address; c) the session has been dropped for reasons other than idle
timeout.
Ethernet is linked
LAN activity is present (in either direction)
Ethernet is not connected, or no power to CPE
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Tel1 Tel2
LAN3 LAN4 TEL1 TEL2
VoIP WPS WLAN WLAN
2.4G 2.4G 5G
VOIP WPS 2.4G WLAN 2.4G WLAN 5G
26019
Issue: 01