Safety Standards Compliance; Emc, Emi, And Esd Standards Compliance - Nokia 7368 Product Manual

7368 ISAM CPE A-240Z-A Product Guide

4.2 Safety standards compliance

4.2.1
Issue: 01
Figure 5 Sample safety label on the CPE equipment
This section describes the CPE compliance with North American safety standards.
Warning —
approved by the party responsible for compliance could void
the user's authority to operate the equipment.

EMC, EMI, and ESD standards compliance

The CPE equipment complies with the following requirements:
•
Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class
A requirements for OLT equipment
•
GR-1089-CORE requirements, including:
•
Section 3 Electromagnetic Interference, Emissions Radiated and Conducted
•
Section 3 Immunity, Radiated and Conducted
•
Section 2 ESD Discharge Immunity: System Level Electrostatic Discharge and EFT
Immunity: Electrically Fast Transients
3FE-46615-AAAA-TCZZA
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
COMMUNICATION SERVICE EQUIPMENT
c US LISTED
®
27FY
Type 3R Enclosure - Rainproof
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la class A est conforme a la norme NMB-003 du Canada
CAUTION
This Assembly Contains Electrostatic Sensitive Devices
Changes or modifications to this unit not expressly
ANSI CPE safety guidelines
18533
31