Configure an A-240Z-A CPE
Procedure 33
102
2
Configure port forwarding.
3
Click Add.
4
STOP. This procedure is complete.
Port triggering
1
Select Application > Port Triggering from the top-level menu in the Ethernet Gateway
window, as shown in Figure 42.
Figure 42
Port Triggering window
Table
36
describes the fields in the Port Triggering window.
Table 37
Port triggering parameters
Field
Application Name
Open Port
(1 of 2)
3FE-46615-AAAA-TCZZA
Description
Choose an application name from the drop-down menu
Enter the open port range
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01