Table 45 Smart Home Status Parameters - Nokia 7368 Product Manual

Configure an A-240Z-A CPE
Procedure 52
126
Table 45 Smart Home Status parameters
Field
IOT Gateway Firmware Status
Filename
Description
Download Status
Download Failure Reason
IOT Gateway Information
IOT GW version
JVM version
Zwave Firmware version
Zigbee Firmware version
IOT GW Status
Zwave Interface Status
Zigbee Interface Status
IOT Config backup/restoration status
IOT Config Backup Status
IOT Config Restore Status
Zwave Config Restore Status
Last Restored Config file
2 STOP. This procedure is complete.
Smart Home configuration
1 Select Smart Home>Configuration from the left menu in the Ethernet Gateway window.
The Smart Home Configuration window appears; see Figure 61.
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Description
Firmware name
Firmware description
Download status: success or failure
Failure reason (if applicable)
IOT gateway identifier
Java Virtual Machine identifier
Zwave firmware identifier (if applicable)
Zigbee firmware identifier (if applicable)
IOT gateway status: active or inactive, or disabled
Zwave interface status: up or down
Zigbee interface status: up or down
Status of IOT configuration backup
Status of IOT configuration restoration
Status of Zwave configuration restoration
Last restored configuration file
Issue: 01