Configuring Port Triggering; Table 8-34 Port Forwarding Parameters; Figure 8-40 Port Triggering Page - Nokia ONT XS-2426X-A Product Manual

Configure a XS-2426X-A indoor ONT
Configuring the Application

Configuring port triggering

Table 8-34 Port Forwarding parameters

Field
Application Name
WAN Port
LAN Port
Internal Client
Protocol
WAN connection list
3
Click Add.
Click Delete to delete a port forwarding configuration.
E
ND OF STEPS
8.41 Configuring port triggering
1
Click Application Port Triggering from the left pane. The Port Triggering page displays.

Figure 8-40 Port Triggering page

December 2021
Issue 1
Description
Select an application name from the list.
The default is Custom settings.
Enter the WAN port range.
Enter the LAN port range.
Select a connected device from the list and enter the associated IP address.
Select the port forwarding protocol from the list:
• TCP
• UDP
• TCP/UDP
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
Nokia ONT
135