Network - EverFocus EPRO NVR Series User Manual

5.4.3 Network

You can configure the network settings on this page.
5.4.3.1 Network
You can configure the basic network settings on this page. After configuring the settings, users
are able to control and monitor the NVR remotely.
Note: EPRO NVR 32 provides two network ports, LAN and WAN. WAN is for configuring the
NVR to the internet; while LAN is for configuring the NVR to the local area network.
Type: Select DHCP, PPPoE or Static from the drop-down list.
DHCP: DHCP server in LAN will automatically assign an IP configuration for the
•
network connection. This setting lets the system use an automatically assigned
(dynamic) IP address. This address can change under certain circumstances, for
instance, when the NVR's network switch/hub has to be rebooted.
PPPoE: This is a DSL-connection application. The ISP will ask the user to input a
•
username and password. Contact your ISP for these details.
Note: If PPPoE is selected as the IP type, the supplied IP Utility program will not
be able to detect the device.
Static: Users can manually set up a Static IP address for the NVR. This type of address
•
is stable and cannot change, but users have to make sure there are no IP address
conflicts with other network-connected devices.
Client Port: Keep 9000 port. Change only when necessary.
HTTP Port: Keep 80 port. Change only when necessary.
UPnP: If you want to enable the UPnP function, click Enable from the drop-down list.
Click Save to save the settings or Refresh to refresh the page.
90
EPRO NVR Series