Ptz Control - EverFocus EPRO NVR Series User Manual

3.5.2

PTZ Control

You can control the connected PTZ camera using the PTZ Control window. On the Live View
window, select a PTZ camera by clicking on the channel, the selected channel will be
highlighted with a red frame and its Live Channel Tool Bar will be displayed. Click the PTZ
button to bring up the PTZ Control window. You can use your mouse to drag the PTZ Control
window and drop it to the desired position on the screen.
Channel Drop-Down List: Click to select a channel of PTZ camera you want to control.
Start Tour : Click to start the Tour function. Click again to stop the Tour function. Note
that for this function to work, users have to set up preset points in advance.
Speed: Slide the bar to the left or right to adjust the control speed.
Direction Buttons: Click the direction buttons to force the PTZ camera to turn to the direction.
Auto Pan : Click to start the Auto Pan function. Click again to stop the Auto Pan function.
Zoom: Click + or – to zoom in or zoom out.
Focus: Click + or – to focus near or focus far.
Iris: Click + or – to adjust the Iris.
Show Preset Window
Points or perform the go to preset function on this window.
To set up Preset Points:
1. Select a preset number (1-255) by clicking on the No. input box.
2. Set up a dwell time for this preset number.
3. Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
4. Click the Set button to jump to the next preset number for configuration. Follow Step 2-3
to set up multiple preset points.
5. After setting up the preset points, click the Save button to save the settings.
6. To clear the setup preset points, select a preset number and then click Clear.
: Click to display or hide the Preset window. You can set up Preset
26
EPRO NVR Series