Table of Contents
Advertisement
3. Getting Started
After pressing the power switch to turn on the NVR, the NVR will enter the System Initialization
process. When the process is done, the Login window will display. Input the Device ID / User Name
and Password. Click the Login button to login.
By default, the User Name is admin and Password is 11111111
After clicking the Login button, the Startup Wizard will be displayed to guide you through the basic
settings for the NVR. Click the Next button to proceed or Cancel to cancel the startup wizard.
Please refer to 3.1 Startup Wizard for more details.
3.1 Turning On / Off the Power
Before powering on the NVR, please make sure the internal HDD have been installed properly.
Once you have completed the basic cable connections, you are ready to turn on the NVR. Simply
plug in the power source and then press the Power Switch on the rear panel of the NVR to turn
on the NVR. The POWER LED will light up if power is normal. Once the system has finished
loading, you can begin to set up the menu options for the NVR.
17
EPRO NVR Series
Chapter
3
Advertisement
Table of Contents
