Table of Contents
Advertisement
Manage Protocol: Click to bring up the Manage Protocol window. You can configure
Custom 1-16 RTSP streaming protocol on this page.
Example:
rtsp://[IP address]:[Port]/ip[A]/[B]
A: 01(ch1), 02(ch2)...
B: 0 (main stream), 1 (sub stream)
• Custom Protocol: Select a custom RTSP protocol profile from the drop-down list to
be configured. Up to 16 profiles can be configured.
• Protocol Name: Input a name for this RTSP protocol profile.
• Stream Type: Indicates Main Stream and Sub Stream are supported. You can
separately configure the Main Stream and Sub Stream settings below.
• Enable Sub Stream: Check the Sub Stream checkbox if you want to enable sub
stream for this RTSP protocol.
• Type: Select RTSP.
• Port: Keep 554 as the RTSP port.
• RTSP URL: Input the RTSP URL syntax in the box. For example:
rtsp://[IP Address]:[Port]/ip[A]/[B]
rtsp://192.168.31.33:554/ip01/0
* IP Address: The IP address of the NVR
* A: Channel number. 01 (ch1), 02 (ch2), and so on
* B: Stream Type: 0 (main stream), 1 (sub stream)
Search: Click to search the IP cameras on the same LAN. The searched IP cameras will
be displayed on the Section 1 list. Note that the IP cameras that have been added to the
NVR will not be displayed on this list.
Add: Click to add the single selected IP camera to the system. Select an IP camera from
the Section 1 list by clicking on it, the selected IP camera will be highlighted with a blue
background and its info will be displayed on Section 2. You can edit the IP camera info
in Section 2. Click the Add button, the IP camera will be added to the system. You can
see this IP camera listed on Section 3 list.
Add Selected: Click to add the multiple selected IP cameras to the system. Select the
desired IP cameras from the Section 1 list by checking the checkboxes and then click the
33
EPRO NVR Series
Advertisement
Table of Contents
