Table of Contents
Advertisement
2. Go to http://www.everfocusddns.com to check an available host name for the NVR. Note
that the host name of the NVR cannot include a space, underline or any special
characters particularly _~ ! @ # $ % ^ & * ( ) + < > " ; : . ,
3. Register the host name on the DDNS setup page for the NVR.
a. Select Enable from the DDNS drop-down list to enable the DDNS function.
b. Select EVERFOCUS_DDNS from the Server drop-down list.
c. Input the host name in the Host Name field.
d. Click the Save button.
4. Configure the NVR Network settings, keep HTTP port "80" and then click the Save button.
If Static IP is selected: Enter the IP address, subnet mask, default gateway and the
DNS Server 1. Please consult with your ISP service provider for the information of
subnet mask, default gateway and the DNS Server 1.
95
EPRO NVR Series
Advertisement
Table of Contents
