Record; Record Settings - EverFocus EPRO NVR Series User Manual

EPRO NVR Series

5.4.2 Record

You can configure the record settings on this page.

5.4.2.1 Record Settings

You can configure the basic record settings on this page.
Channel: Select a channel to configure the record setting individually.
Record: Select Enable to enable the record function.
Stream Mode: Select Main Stream or Sub Stream to record on this channel.
Pre-Record: Select Enable to enable pre-recording for motion detection or I/O trigger record.
Copy: You can apply the same configurations from one channel to the desired channels. Click
the Copy button, the below channel selection field appears. Select a desired channel (or All),
click the Copy button, the selected channel(s) will be applied with the same configurations.
Click Save to save the settings or Refresh to refresh the page.
87