Table of Contents
Advertisement
5.2 Remote Live View Window
After logging in the system, the below Live View Window appears.
IP Camera
9
No. Name
1
Live Channel
Live Channel
2
Tool Window
1
2
3
Description
You can perform the following functions on each channel:
a. Double click on a channel can display the channel in full screen. To exit
the full screen mode, double click on the channel again.
b. You can right-click to bring up the Live Channel Tool Window (No.2).
c. You can drag and drop a channel to the desired position on the layout.
Click on a channel, a Drag Channel icon will display. Drag and drop the
channel to the desired position on the layout.
Right-click on any channel can bring up the Live Channel Tool Window.
All Main Stream: Click to display Main Stream for all channels on the
layout. To configure Main Stream, refer to 5.4.2.3 Main Stream.
All Sub Stream: Click to display Sub Stream for all channels on the layout.
To configure Sub Stream, refer to 5.4.2.4 Sub Stream.
All Mobile Stream: Click to display Mobile Stream for all channels on the
layout.
Main Stream: Click to display Main Stream for this channel.
Sub Stream: Click to display Sub Stream for this channel.
Show Bit rate: Click to display the bit rate of this channel on the upper
right corner of this channel.
4
5
6
10
74
EPRO NVR Series
7
8
11
Advertisement
Table of Contents
