Table of Contents
Advertisement
EPRO NVR 16
You can install up to two 3.5" HDDs inside the NVR for recording videos. The max. capacity of
each HDD is up to 6TB.
1.
Make sure the NVR is power-off.
2.
Unscrew the 8 housing screws on the NVR (2 on both sides and 4 on the rear side), and
remove the housing from the NVR.
3.
Find the SATA cable inside the NVR, and connect the SATA cable to the SATA port on the
HDD.
4.
Find the internal power cable, and connect the internal power cable to the HDD.
Note: The internal power cable is connected to the Main board inside the NVR. The
power cable features multiple connectors, which can be used to connect up to two
HDDs.
8
EPRO NVR Series
Advertisement
Table of Contents
