EverFocus EPRO NVR Series User Manual page 35

To perform the Tour function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Click the Start Tour button
3. To stop the Tour function, click the Stop Tour button.
To perform the Go to Preset Point function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Select a preset number (1-255) by clicking on the No. input box.
3. Click the Go button.
.
27
EPRO NVR Series