Table of Contents
Advertisement
EPRO NVR Series
Parity: This field is to select the parity level at which you will be connected.
Tour: Select Enable to enable the tour function.
Address: Input the ID address of the PTZ camera. Note this address should match the one set up
on the PTZ camera.
Copy: You can apply the same configurations from one channel to the desired channels.
Select a channel from the Copy drop-down list first and then select a desired channel (or All)
from the To drop-down list, click the Copy button, the selected channel(s) will be applied
with the same configurations.
Click Save to save the settings, or Cancel to cancel and leave the page.
60
Advertisement
Table of Contents
