Table of Contents
Advertisement
8. After clicking the OK button, the system will enter the Live View window (refer to 3.2 Live
View Window). Now you can start using the NVR.
Note:
1. If no HDD has been connected to the system, a warning message will pop-up. Click X to
close the warning message. If you want to perform the recording function, you will have
to connect the HDDs to the system.
2. If multiple HDDs have been connected to the system, the system will automatically
detect the connected HDDs when system starts up. The status of the connected HDDs
will be display in the Disk Warning window. Take the below image for example, HDD1 has
not been formatted; HDD2 is running normally (in recording state).
22
EPRO NVR Series
Advertisement
Table of Contents
