Rtsp - EverFocus EPRO NVR Series User Manual

5.4.3.4 RTSP

You can configure the RTSP setting on this page.
RTSP Enable: Select Enable from the drop-down list to enable the RTSP function.
RTSP Port: Keep 554 as RTSP port.
Verify: Select Enable from the drop-down list to enable the verify function.
Username: Input the username.
Password: Input the password.
RTSP URL Syntax:
rtsp://[IP Address]:[Port]/ip[A]/[B]
rtsp://192.168.31.33:554/ip01/0
* IP Address: The IP address of the NVR
* A: Channel number. 01 (ch1), 02 (ch2), and so on.
* B: Stream Type: 0 (main stream), 1 (sub stream)
Click Save to save the settings or Refresh to refresh the page.
97
EPRO NVR Series