4.1.1.4 Alarm
You can configure the motion and alarm settings on this page.
4.1.1.4.1 Motion
You can configure the Motion setting on this page.
Channel: Select a channel to apply with the motion detection function.
Enable: Select Enable from the drop-down list to enable the function.
Buzzer: Select a buzzer sound duration from the drop-down list. If you want to disable the
buzzer, select Disable from the drop-down list.
Sensitivity: Select a sensitivity value from the drop-down list. The larger the value, the
higher the sensitivity.
Area: Click to set up the motion detection area. Drag a rectangle with your mouse. The
selected areas will be highlighted in red and are applied with the motion detection function.
49
EPRO NVR Series