Table 29 Maintenance - Recording; Table 30 Maintenance - Troubleshooting - Grandstream Networks GAC2500 Administration Manual

PnP(3CX) Auto Provision
Automatic Upgrade
Automatic Upgrade Check
Interval (m)
Hour of the Day (0-23)
Day of the Week (0-6)
Firmware Upgrade and
Provisioning
Disable SIP NOTIFY
Authentication
Auto Reboot to Upgrade
Without Prompt
Factory Reset

Table 29 Maintenance - Recording

Call
Normal
Recording. The recording page lists the recordings from calls and normal recording. For each record,
users can rename, download, lock, and delete it. If the recording is locked, it cannot be deleted. Or users
can batch delete the recordings by checking multiple records and delete them.

Table 30 Maintenance - Troubleshooting

Syslog
Syslog Server Address
Syslog Level
Firmware Version 1.0.1.34
If set to "Yes", the phone will send SUBSCRIBE packets to broadcast
address to request 3CX server's provisioning. It should properly set
3CX before using this feature. Please note this option should be set to
"No" if "Enable PNP Feature
It is used to set if and how often the phone system will check the server
for new firmware and configuration file downloading. It can be selected
from
 "No"
 "Check Every Day"
 "Check Every Week"
 "Check at a period of time"
The default setting is "No".
Specifies the time period to check for firmware upgrade (in minutes).
The default setting is 10080 minutes (7 days).
Defines the hour of the day to check the HTTP/TFTP server for
firmware upgrades or configuration files changes.
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrades or configuration files changes.
Defines the rules for automatic upgrade and configuration file: Always
Check at bootup, when Firmware prefix/suffix changes, Skip the
Firmware Check.
Device will not challenge NOTIFY with 401 when set to "Yes".
If set to "Yes", the phone will automatically start upgrading after
downloading the firmware files. Otherwise, users would need confirm in
the prompted message in LCD to start upgrading process. The default
value is "Yes".
It is used to reset the phone system to the default factory setting mode.
If the "Clear the SD card" is checked, the SD card storage mounted to
the phone will be format as well.
Rename, download, and delete the recording that is saved in a call or a
conference.
Rename, download, and delete the recording that is saved in Recorder
app.
The URL/IP address for the syslog server.
It is used to select the log priority to display. It can be selected from
 Verbose
 Debug
 Info
 Warn
 Error
GAC2500 Administration Guide
" is set to "Yes".
Page 37 of 54