Funkwerk EGO FLASH Operating Manual page 46

→ "Call/dial <name>"
→ "Call/dial entry
number <1-20>"
→ "Yes / Call / Dial"
→ "No / Return"
→ "Abort / Cancel"
→ "Help"
Some mobile phones may not support a call list via Bluetooth
entries with this command.
This requires that numbers / names are included in the call list. If there is no entry, the EGO FLASH informs the user.
After the command, all numbers / names that have been dialed are shown on the display. Afterwards, the following
commands are available to you:
→ "Call/dial <name>"
→ "Call/dial entry
number <1-20>"
→ "Yes / Call / Dial"
→ "No / Return"
→ "Abort / Cancel"
→ "Help"
Some mobile phones may not support a call list via Bluetooth
entries with this command.
EGO FLASH
To dial the name in the call list
To dial a numbered entry in the call list
To confi rm the selection of the number/name
To not dial the number/name in the call list
Ends the dialogue without carrying out a function
Calls up Help and an explanation of possible commands
"Show calls received"
To dial the name in the call list
To dial a numbered entry in the call list
To confi rm the selection of the number/name
To not dial the number/name in the call list
Ends the dialogue without carrying out a function
Calls up Help and an explanation of possible commands
®
. If this is the case, the EGO FLASH cannot show any
® . If this is the case, the EGO FLASH cannot show any