Dictation Function - Funkwerk EGO FLASH Operating Manual

Connection / coupling
Under the "Option" menu item, a "New device" may be coupled, or an already coupled device may be connected. A total
of 10 devices may be coupled, whereas only one device may be active. If a "New device" is selected, a Bluetooth ® device
search is performed. The desired device can be selected from there.
If the music device does not support coupling from other devices, it is also possible to couple the EGO FLASH from
the music device via the "Couple from device" menu item. In both cases, a four-digit PIN code is displayed by the EGO
FLASH, which must be entered into the music device. Is the PIN is incorrect, the menu jumps back to device selection,
and you must repeat the process.
If an iPod™ or MP3 player with an A2DP adapter is used, these devices couple automatically with the EGO FLASH. For
this, the "Couple from device" menu item must be selected during the search for devices. After coupling, all playback
functions are available to the user.
Playback
The following functions are available for playback and are shown in the display:
→ Play
→ Pause
→ Stop
→ Forwards (by title)
→ Reverse (by title)
→ Volume setting (playback volume adjustable in 10 steps)
These functions are controlled with the keys of the control unit. For a description of these keys, please see the
"Symbols" chapter.

7.5.8 Dictation function

Symbol:
Record
The dictation function allows you to record voice messages. This function is especially useful while driving, when the
EGO FLASH