Disassembly; Door; Wooden Shelves; Wires Shelves - EdgeStar CWR461DZ Service Manual

3. DISASSEMBLY

3-1 DOOR

(Models：CWR461DZ , CWR262DZ )
Loosen 2 bolts fixing the lower door axis to the lower
hinge to remove the door. (Figure 1)
(Models：CWR1101DZ, CWR1551DZ, CWR1551DD,
CWR1431TZ)
Loosen 2 bolts fixing the lower door axis to the lower
hinge to remove the door. (Figure 2)
(Models：CWF340DZ)
Loosen 3 bolts fixing the lower hinge to the cabinet to
remove the door. (Figure 3)
Lower Door Axis
Lower Hinge
BOLT Figure 1
Figure2
Lower Hinge
BOLT
Figure3
- 8 -

3-2 WOODEN SHELVES

(Models：CWR461DZ , CWR262DZ
CWR1101DZ, CWR1551DZ, CWR1551DD, CWR1431TZ)
 Open the door completely.
 If necessary, make sure you remove all the contents sitting
on the shelf..
 Pull the shelf forward until the notch aligns with the plastic
post on each side of the shelf track.
 Lift the shelf until both notches pass through the posts.
 Continue to pull the shelf forward until it is completely
removed from the inner compartment. (Figure 4)

WIRES SHELVES

(Models：CWF340DZ)
 Open the door completely.

If necessary, make sure you remove all the contents sitting
on the shelf..
 Pull the shelf forward until the notch aligns with the plastic
post on each side of the shelf track.
 Lift the shelf until both notches pass through the posts.
 Continue to pull the shelf forward until it is completely
removed from the inner compartment. (Figure 5)
Figure 4
Figure 5