Lamp - EdgeStar CWR461DZ Service Manual

3. DISASSEMBLY

3-3 LAMP

(Models：CWR461DZ , CWR262DZ , CWR1101DZ,
CWR1551DZ ,
LED light in upper zone
1.
Loosen four screws. (figure 6)
2.
Open the electrical box and remove four fixer on the PCB
board. (figure 7)
3. Unplug the led light connector. (figure 8)
4.
Pull out the LED light. The LED light is like below. (figure 9)
LED light in lower zone
1.
screws
2.
Figure 6
5. Loosen two screws. (figure 12)
Figure 7
6.
connector
Figure 8
(Models：CWF340DZ)
LED Light in upper zone
1. Loosen four screws. (figure 14)
Figure 9
- 9 -
Loosen one screws. (figure 10)
Unplug the led light connector. (figure 11)
Screw
Pull out the LED light. The LED light is like below.
(figure 13)
Figure 10
connector
Figure 11
Figure 12
Figure 8
Figure 13
Figure 14