Display Board Board & Control Board - EdgeStar CWR461DZ Service Manual

3. DISASSEMBLY
2. Pull out the cover board
3. Take out the LED light connector
4. Lossen the LED light five fixer.
5.
The LED light is like below. (figure 40)
3-4 DISPLAY BOARD & CONTROL BOARD
(Models：CWR461DZ, CWR262DZ, CWR1101DZ,
CWR1551DZ)
1. Loosen four screws. (figure 41)
2. Pull out the electrical box.
（figure 37)
Figure 37
（figure 38)
Figure 38
（figure 39)
Figure 39
Figure 40
Figure 41
Screw
3.
Unplug all cable connectors. (figure 42)
4. Press the plastic nail supporting the control board with
forefinger and thumb.
5. The control board is like below. (figure 43)
6. Disassemble the display board. (figure 44)
7. The display board is like below. (figure 45)
(Models：CWF340DZ)
1. Loosen free screws. (figure 46)
- 12 -
Figure 42
Figure 43
Figure 44
Figure 45
Figure 46