3. DISASSEMBLY
2.
Loosen screw. You can replace the sensor ,heater &
fan.(figure 95)
screw
wire housing
heater
evaporator
evaporator
Figure 95
heater
3-7 COMPRESSOR PTC STARTER & OVERLOAD
PROTECTOR
(Models:CWR262DZ)
1. Remove the clamp that is used to fix the compressor
junction box. (figure 96)
2. Remove the compressor junction box. (figure 97)
3. Dismantle the compressor PTC starter and overload
protector. (figure 98)
4. The compressor PTC starter and overload protector is like
below. (figure 99)
(Models:CWR461DZ)
1.
Loosen one screw. (figure 100)
Figure 96
Figure 97
- 19 -
Figure 98
Figure 99
Figure 100