3. DISASSEMBLY
11.Remove the six screws from Air duct board C (figure 67)
12.Loosen the display PCB board connector. Pull out the air
duct board C.Take out the front display PCB board cover from
left side(figure 68)
Figure 68
13. Loosen the fixer from the display PCB board. Take out the
display PCB board(figure 69)
14.
The display board is like below. (figure 70)
3-5 POWER BOARD & TRANSFORMER
(Models: CWR262DZ)
1. Remove the screws from the box near compressor. (figure
71)
Figure 67
Front display PCB board cover
Figure 69
Figure 70
Figure 71
2. The
power
board & transformer as below. (figure 72)
(Models:CWR461DZ, CWR1101DZ, CWR1551DZ)
1.
Loosen three screws. (figure 73)
2.
The
power
board & transformer are like below. (figure 74)
(Models: CWF340DZ)
1.
Loosen three screws. (figure 75)
- 15 -
Figure 72
Figure 73
Figure 74
Figure 75