Chapter 5: Configuration
Decoded (HHP)
Prefix/Suffix
Refer to "Prefix/Suffix" beginning on page 144.
5.11.3.7 EAN 8
Enabled
Set this parameter to on to enable "EAN 8".
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either
2 or 5 characters.
Addendum Required
When this parameter is set to on
without an addendum.
Addendum Separator
Addendum Separator is a space that is added between the EAN 13 bar code and the
Add-on code/Addenda. When this parameter is set to on
accept the main bar code without an addendum.
Prefix/Suffix
Refer to "Prefix/Suffix" beginning on page 144.
5.11.3.8 UPC A Settings
Enabled
Set this parameter to on to enable "UPC A" bar code scanning recognition.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
158
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
the scanner does not accept the main bar code
,
the scanner does not
,