Ean 13 Settings - Psion Teklogix Workabout PRO G2 User Manual

Chapter 5: Configuration
Decoded (HHP)
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s). Double-tapping on these parameters displays a
screen in which you can set the minimum and maximum allowable code lengths – 0
to 80.
Field Size/Char
Refer to page 143 for details.

5.11.3.6 EAN 13 Settings

Enabled
Set this parameter to on to enable "EAN 13".
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either 2
or 5 characters.
Addendum Required
When this parameter is set to on the scanner does not accept the main bar code
,
without an addendum.
Addendum Separator
"Addendum Separator" is a space that is added between the EAN 13 bar code and
the Add-on code/Addenda. When this parameter is set to on the scanner does not
,
accept the main bar code without an addendum.
ISBN Translate
When this parameter (International Standard Book Number) is enabled, the first 3
characters ('978') are ignored and the checksum (0.9, 'X') is calculated on the
remaining characters.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 157