Page 4
Return-To-Factory Warranty Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limi- tation of Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register.
Page 5
RoHS-compliant as per the EU directive. Other than as noted below, a Psion Teklogix product that does not have an accompanying RoHS logo signifies that it was placed on the EU market prior to July 1, 2006, and is thereby exempt from the directive.
ROGRAM Microsoft's End User License Agreement You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (“MS”). Those installed software products of MS ori- gin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties.
Page 14
SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For addi- tional information see http://www.microsoft.com/exporting/. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 15
Agreement, we do not grant you a license to the Software, and you may not install or use the Software or any accompanying documentation. The Software is the property of Psion Teklogix Inc. or its licensors and is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The Soft- ware is licensed, not sold.
Page 16
Software will meet your requirements. THE SOFTWARE IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY WHATSOEVER AND WITHOUT ANY TECHNICAL SUPPORT OF ANY KIND. WE DISCLAIM ANY AND ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS, Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 17
All title and copyrights in and to the Software, and any copies thereof, are owned by Psion Teklogix Inc. or its suppliers. The Software also contains copyrighted material licensed from our suppliers or obtained from open source and all rights to such copyrighted material rests with such suppliers.
Page 18
You acknowledge that you have read this Agreement, understand it, and that it is the complete agreement between you and Psion Teklogix with respect to the subject matter hereof and supersedes all prior agreements, oral or written.
Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn betreffende radioapparatuur en telecommunicatie-eindappa-ratuur 199/5/EG. (verklaring beschikbaar: www.psionteklogix.com). Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com). Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 20
Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). PSION TEKLOGIX tímto prohlašuje, že 8525 G2/8530 G2 je ve shodě se základními požadavky a dalšími příslušnými ustanovenímisměrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na www.PsionTeklogix.com.
Page 21
FCC guidelines and those standards. To main- tain compliance with the FCC RF exposure guidelines, ensure the antenna is at least 20 cm from your body when transmitting. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Approvals And Safety Summary...
Page 22
Do not operate the equipment without the covers and enclosures properly installed. AUTION Use of the Vehicle Mount Computer while charging the fork truck battery is prohibited. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual NCLOSURES...
Page 23
To reduce risk of electric shock, unplug the vehicle-mount computer from the DC source before attempting any maintenance or cleaning. Warning: Physically disconnect the 8525 G2/8530 G2 from the vehicle battery during battery charging (into AC outlet). Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Approvals And Safety Summary...
1.1 About This Manual This manual describes how to configure, operate and maintain the Psion Teklogix 8525 G2/8530 G2 vehicle-mount computers. Chapter 1: Introduction provides a basic overview of the 8525 G2 and 8530 G2 vehicle-mounts. Chapter 2: Basic Checkout describes the steps required to get the 8525 G2/8530 G2 ready for operation.
32KB instruction/32KB data cache On-board RAM: 128 MBytes SDRAM On-board ROM: 64 MBytes FLASH • Operating System Windows CE 5.0 • Programming Environment HTML, XML Visual Studio and SDK Java Virtual Machines BSquare JVM Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 29
VGA, 640 x 480 10.4" diagonal CCFL Backlight, 450 cd/m2 backlight with brightness control Keyboards: 3 keyboard formats available Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 1: Introduction 8525 G2/8530 G2 Features backlight with brightness control backlight with brightness control...
Page 30
USB host port One port with: DB9 plug RS232 (optional +5V or +12V, 500MA on pin 9) One High density port with: one RS232 serial comm. port 1 USB device port Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Flash slot, a PCMCIA slot and SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel. Refer to Appendix A: Support Services And Worldwide Offices for the service number closest to you.
Use vehicle-mounts only in the environments for which they are designed. • All Psion Teklogix freezer vehicle-mounts have built-in heaters where required to warm internal components. To help maintain the temperature, units should be switched on before entry into a freezer environment and should be left connected to vehicle power and running at all times while in a freezer environment.
Page 37
Do not install the 8525 G2/8530 G2 in such a way that the power cable is bent 90 degrees as this may damage the power cable and power cable strain relief. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Backup Battery Capacity °...
[BLUE] [ENTER/ON] to turn off the unit. Note: Pressing the 8530 G2 ON/OFF switch or using the [BLUE][ENTER/ON] key combination does not result in a complete reboot. The unit enters ‘suspend’ state until it is switched on. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
In this case, skip to Step 4 on page 17. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Calibrating The Touchscreen...
Page 40
2. Choose the radio icon to open the Wireless LAN Settings window – in the sample screen below, this is labelled PTXCF838. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 2.1 Network And Dial-Up Connections Figure 2.2 Wireless Settings Window...
Page 41
This tab displays existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. Note: Connect button – To force connection to a specific, existing network, Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 42
If you are using an “Infrastructure” network – one in which 8525 G2/8530 G2s must pass data through an access point – leave the checkbox next to ‘This is an ad hoc network’ empty. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 2.5 Wireless Properties Dialog Box...
Page 43
In environments where a centralized Authentication Server or EAP frame- work is not available, user authentication is based on a ‘Pre-Shared Key’ method – WPA-PSK. If you are using Pre-Shared Key authentication, you Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 44
MAC layer. Available EAPs are listed in the dropdown menu next to the ‘EAP’ option. • To activate “802.1X”, tap on the checkbox next to ‘Enable 802.1x authentication’, and press the [SPACE] key to enable it. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
IP address. This is useful if, for example, you are out of communi- cation range for a longer period of time and your 8525 G2/8530 G2 is dropped from the network. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Assigning An IP Address...
The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS and DNS resolvers. The format for these fields is ###.###.###.###. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 2.8 Defining An IP Address...
To change the properties of an existing preferred network: • Highlight the network that you want to modify. • Tap the Properties button, and press [ENTER]. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Advanced Features...
Detailed information about each of the SCU tabs – Main, Config, Status, Diags and Global Settings – is provided under “SCU Tabs” beginning on page 26. To launch the SCU so that your vehicle-mount can connect to a wireless LAN: • Tap on Start>Programs>Summit>SCU. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 49
Refer to “SCU Security Capabilities” on page 30 for details about security settings. Additional EAP details are described in “EAP Credentials” on page 32. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Using The SCU To Connect To The WLAN...
35. 2.10 SCU Tabs This section provides a detailed description of each of the tabs available in the SCU – Main, Config, Status, Diags and Global Settings. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual is not connecting:...
Software Version: This field displays the version of the device driver and the SCU that are running on the 8525 G2/8530 G2. • About Box: This box provides information about the SCU. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Main Tab...
Use Rename button to change name. Service set identifier (SSID) SSID for WLAN to which the radio connects. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Description Maximum of 32 characters. Maximum of 32 characters. Value Default...
Page 53
Extensible Authentication Protocol type used for EAP Type 802.1X authentication to access point. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Value Maximum of 16 characters. CAM: Constantly awake. Maximum: Maximum power savings.
802.1X authentication using pre-shared keys or an EAP type, required for WPA2 and WPA. • Data encryption and decryption using WPA2 AES, WPA TKIP or WEP. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Description User: Username or Domain/Username (up to 64 characters).
Page 55
Windows Zero Config (WZC) rather than the SCU is used to configure the type. With WZC, the native Windows supplicant instead of the SCU integrated supplicant is used. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout SCU Security Capabilities...
ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate and Radio Mode. These SCU settings along with SCU global settings and the WZC settings will be applied to the radio module. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Amount of time in milliseconds Ping Timeout that passes without a response before ping request is consid- ered a failure. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Global Settings Tab Value Default On, Off...
Page 58
TX Diversity diversity when transmitting data to AP. Use Wi-Fi Multimedia Exten- sions, also know as WMM. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Description Integer from 0 to 7200000. dBm: 5, 10, 15, 20, 25, 30, 35...
This a toggle button so when you tap on it, it changes to Stop Ping. Closing this window or tapping on another button also stops the ping. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 2: Basic Checkout Status Tab...
Files and data stored in flash are preserved. Once the OS loads, any executables and cab files in the startup folders are run. The cab files are deleted by the cab file installer unless they are marked read-only. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 61
3.11 General Maintenance ......56 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
- Compact Flash slot - for 802.11g radios or additional storage memory Radio Dome Figure 3.1 Front Of 8525 G2 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Features Of The 8525 G2/8530 G2...
Page 64
Chapter 3: Getting To Know The 8525/30 G2 Features Of The 8525 G2/8530 G2 Tether Port Keyboard Port Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual RS232 Serial Port Figure 3.2 8525 G2 Ports Auxiliary Port RS232 Serial Port Figure 3.3 8530 G2 Ports...
The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that they are not chorded (two keys held down simultaneously). The modifier key must be pressed first followed by the key whose function you want modified. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
[BLUE][SHIFT] turns the [CAPS] key on so that all alpha characters are printed in uppercase until the [BLUE][SHIFT] sequence is pressed again. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual is displayed at the bottom of the unit screen. Once another key...
Page 67
The [HOME] key moves the cursor to the top of the form or page. The [END] Key The [END] key moves the cursor to the bottom of the form or page. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
To access function key [F21], press the [BLUE] key followed by [F1]. • Press [BLUE] [F2] to access Function key [F22], and so on. 3.4.2 Macro Keys Important: Refer to “Keyboard Macro Keys” on page 91 for details about creating macros. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Stylus Properties dialog box in the Windows CE Control Panel to recalibrate the screen. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2...
Note: Keep in mind that even when the power indicator LED is illuminated, if the battery voltage is below 10.0V, you will not be able to turn the vehicle-mount on. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 3.5 Stylus Icon...
LED Behaviour Solid green Slow flashing green Blinking yellow Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Figure 3.6 Keyboard LEDs Description External power in use. Backup battery is present.
LED behaves with your application. 3.6.3 Onscreen Indicators The taskbar at the bottom of the screen displays a variety of system status indicators. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Radio Traffic LED Behaviour LED flashes yellow.
Page 73
No signal, 1% to 25% bar, 26% to 50% bar, 51% to 75% bar and 75% to 100% bar. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Onscreen Indicators in the taskbar.
Page 74
External DC Power This external DC power icon is displayed in the taskbar when the unit is using external DC power and the backup battery is not present. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Decoded scanners must be configured by scanning special configuration bar codes. In these cases, the scanner manufacturer provides programming manuals for configura- tion purposes. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 USB Device...
Scan In Progress: scan LED displays solid red colour. • Successful Scan: scan LED displays solid green colour and turns off when the scan is ended. • Unsuccessful scan: scan LED flashes red. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Aim at the bar code and press the trigger. A scan beam and a warning indicator appear until a successful decode is achieved or six seconds have elapsed. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Troubleshooting...
Insert the barrel of the plug into the tether port and rotate slowly until it clicks into place. The red dot on the port and on the connector should be aligned. Tether Port Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 3.8 The Tether Port...
USB Device I/F connection (to, for example, connect a PC or laptop computer to the 8525 G2/8530 G2). Auxiliary Connector Figure 3.9 Auxiliary Port Cable Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Monitoring The Network Connection Connector...
The chemicals listed below must not come into contact with the touchscreen: • mustard, ketchup, • sodium hydroxide, • concentrated caustic solutions, Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Avoid abrasive cleaners, solvents or strong chemicals for cleaning. • To clean ink marks from the keypad and touchscreen, use isopropyl alcohol. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 3: Getting To Know The 8525/30 G2 Cleaning The 8525 G2/8530 G2...
Switch between active applications Open task manager Move the cursor Open file, folder or icon Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 4: Working With Windows CE 5.0 Navigating In Windows CE And Applications Key or Key Combination...
When the 8525 G2/8530 G2 boots up, the startup desktop (shell) is displayed. Any applications stored in the Startup folder start up immediately. Note: The startup folder is located in \Windows\StartUp and \Flash Disk\StartUp. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual [ENTER] [ESC] [TAB] To move cursor up [SHIFT] [TAB] To display the contents of the next ‘tab’...
Network and Dial-up Connections icons in the Control Panel. Microsoft WordPad Choosing this option launches Microsoft WordPad, a trimmed version of the Microsoft Word application. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 4: Working With Windows CE 5.0 The Desktop Icons...
Control Panel dialog box associated with the icon. • To display a tooltip, tap and hold the stylus on an icon. • To display the Control Panel dialog box associated with an icon, double-tap on the icon. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Press [BLUE] [0] (zero) to display the Start menu using the keyboard. Note: Tap on the item in the menu with which you want to work. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 4: Working With Windows CE 5.0...
123456. • Tap on OK – you can now access all menu items in the Start Menu along with the icons in the taskbar. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 4.1 Security Levels...
By default, a security icon is not displayed for user-level security. Note: It is recommended that you enable ‘Allow Teklogix Security Level’ so that authorized Psion Teklogix service personnel can access your unit should it require maintenance. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 4: Working With Windows CE 5.0...
Command Prompt Command Prompt is used to access the DOS command prompt. At the prompt, you can type DOS commands such as dir to display all the directories in the drive. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
– a short description of the status of the icon, or to display the Control Panel dialog box associated with the icon. • Choose System Tray from the Shortcuts Start Menu. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 94
The Task Manager option allows you to switch to another task or to end an active task. To display the task manager window: • Choose Task Manager in the Start Menu, or Press [ALT] [ESC]. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Control Panel The Control Panel contains applets used to configure hardware, the operating system and the shell. If your 8525 G2/8530 G2 is running with the Psion Teklogix Tekterm application or another application, additional configuration applets may appear in the Control Panel.
– Bootloader. This option behaves like cold-reset, except that the 8525 G2/8530 G2 starts Bootloader rather than Windows CE. Suspend The Suspend option suspends the 8525 G2/8530 G2 immediately – this is equivalent to turning the vehicle-mount off. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
A dialog box (like the samples screens in this section) appears when you need to make selections and enter further information. Checkbox Figure 4.2 Navigating Dialog Boxes Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 4: Working With Windows CE 5.0 Dropdown Menu Button...
Page 98
Saving Your Choices: Once you’ve made all your changes, tap on OK to save your changes and exit the window. Note: A dialog box item that is displayed in grey text indicates that it is not currently available. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 99
5.5.8 Narrow Band Radio Setup ..... .106 5.5.8.1 Info Tab ......106 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Startup folder start up immediately. • Press [BLUE][0], or • Tap on the Start button in the taskbar to display the Start Menu. • Tap on Settings>Control Panel. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Remote Desktop Connection...
The client checks that the cer- tificate has been digitally signed by a certification authority that the client explicitly trusts. “Certificate Assignment” on page 105 directs you to the appropriate setup information. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.1 Control Panel...
Page 105
It also allows you to adjust the keyboard backlight threshold and intensity. Additional tabs also allow the configuration of macros and scanner key remapping. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Control Panel Icons...
Page 106
Suspend state. It also allows you to define which Card Slots are active and to turn power for the card slots (PCMCIA and SD/MMC) on and off. This dialog box also allows you to enable and disable the built-in Blue- tooth radio. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 107
Teklogix Scanners Used to set up scanner parameters and choose the bar code symbologies that the 8525 G2/8530 G2 scanner will successfully read. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Control Panel Icons...
Page 108
Chapter 5: Configuration Control Panel Icons Total Recall This is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept and is extended to incorporate powerful advanced features.
• In the Display Properties dialog box, open the Background tab. This option allows you to change the background colour or add an image. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.2 Display Icon Chapter 5: Configuration...
Note: Keep in mind that this option may be restricted to supervisory use only. • In the Display Properties dialog box, open the Backlight tab. Note: Backlight changes take effect immediately. You do not need to reset the 8525 G2/8530 G2. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
[BLUE] and [ORANGE] modifier keys. This dialog box also allows you to define macro keys and remap the keyboard. • In the Control Panel, choose the Keyboard icon. Figure 5.3 Keyboard Icon Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Note: Use the field at the bottom of this dialog box to test the repeat delay and rate settings you’ve chosen. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
A/C adaptor. 5.5.2.3 Keyboard One Shots • In the Keyboard Properties dialog box, open the One Shots tab. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Keyboard Properties...
Page 114
If you press the modifier key twice, it is locked ‘on’, remaining active until the modifier key is pressed a third time to turn it ‘off’. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual – [ALT], [SHIFT], [CTRL], [ORANGE] If this key is displayed in lowercase characters in the is not locked.
Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Keyboard Properties...
[CTRL] and [SHIFT] states to Unicode™ values. This tab shows the configured Unicode character along with the Unicode value. Keep in mind that Unicode configurations are represented as hexadecimal rather than decimal values. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Scancode Remapping allows you to change the functionality of any key on the Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration...
Page 118
(e.g., Macro 2). Adding A Remap To add a new remapping: • Tap the stylus on the Add button at the bottom of the dialog box. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 119
In the Scancode Remapping tab, tap on the remap you want to edit. • Tap on the Edit button, and make the appropriate changes. • Tap on OK to save your changes. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Keyboard Properties...
• In the Control Panel, choose the Volume & Sounds icon. 5.5.3.1 Volume Adjustments • Slide the volume button upward to increase the beeper volume or down- Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.4 Volume Icon...
In the Control Panel, choose the Power icon. 5.5.4.1 Battery Capacity The Battery tab displays status of the internal battery in your unit. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.5 Power Icon Chapter 5: Configuration Power Properties...
Pressing [ENTER] wakes the system from suspend state. When the 8525 G2/8530 G2 is in suspend state, the network connection is broken immediately; you must re-establish the network connection. 5.5.4.3 Advanced Power Properties Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
This tab allows you to enable or disable power to the individual CF, PC Card and SDIO slots in your unit. Built-In Devices Power Status A checkmark next to Enable Bluetooth indicates that the unit’s built-in, Bluetooth radio is enabled. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
In the Control Panel, choose the Stylus icon. 5.5.5.1 Setting Double-Tap Sensitivity • In the Double-Tap tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.6 Stylus Icon...
Follow the directions in the Calibration tab to recalibrate the screen. 5.5.5.3 Touch – Disabling The Touchscreen • Tap on the checkbox next to Disable the touch panel. The touchscreen will not accept screen taps. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Stylus Properties...
It is not possible to have two or more identical mappings—for example [F1] cannot be mapped to the Non-Decoded Scanner twice—even if the trigger type is different. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.7 Manage Triggers Icon...
Page 127
The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all changes made will be discarded. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Manage Triggers...
“double-click” event will have occurred. If a mapping with the type Up/down has also been configured for the same source, it will only receive the first set of trigger events. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
8525 G2/8530 G2. DSP x.x / FPGA 0xNN indicates the firmware revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN represent actual revision numbers. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.9 Narrow Band Icon...
Page 131
Number of transmitted frames Number of received radio link aborts Number of transmitted radio link initialization messages Number of received polls Number of transmitted retries Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Narrow Band Radio Setup Description...
Page 132
Actual difference in time (in RTC ticks) between when the most recent trans- Tx D mit (with timestamp) was scheduled to start and when it actually started. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Table 5.1 Protocol Statistics Descriptions Description...
The allowable range for this parameter is Note: The Channel Number dropdown menu displays only the channels that have been enabled in the Channel Enable List. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Narrow Band Radio Setup...
Page 134
Setting this parameter to Slow means a higher threshold – the 8525 G2/8530 G2 is more tolerant of poor communication quality. When the channel quality of the vehicle-mount radio drops below 46%, the unit monitors the channel quality for 15 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 135
Manual Switch Table • Tap on Set Switch Table to display the Manual Switch Table dialog box. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Narrow Band Radio Setup...
Page 136
• Once you’ve assigned the switching order, tap on OK to close the dialog box. The channel list is added to the selected channel in the Manual Switch Table dialog box. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Enable Cellular Protocol The value assigned to this parameter must be identical to the value assigned to the corresponding parameter in the Psion Teklogix Network Controller, Wireless Gateway or Base Station. A warm reset of the 8525 G2/8530 G2 is required before this parameter can take effect.
Page 138
If the channel quality falls to below 46%, the terminal begins searching for a new channel. A value from 1 to 200 can be assigned to this parameter. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Sync Delay Window Delay Poll Timeout...
Tap on the X button at the top of the dialog box. 5.5.8.4 Power Tab Enable Power Saving When this parameter is checked, power saving is enabled. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Narrow Band Radio Setup...
The options in the Modulation / Baud Rate dropdown menu are: 2 Level/4800, 2 Level/9600, 4 Level/9600 and 4 Level/19200. The value assigned to this parameter must be identical to the corresponding parameter in the Psion Teklogix Base Station. This parameter is stored in the radio’s non-volatile memory. The...
Page 141
Tap on the Frequency button to display the Frequency Table dialog box. • Tap on the Copy “Receive” to “Transmit” button to copy the contents of the Receive fields into the corresponding Transmit fields. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Narrow Band Radio Setup...
In the Control Panel, choose the Bluetooth Device Properties icon to display the Bluetooth Manager screen. The Bluetooth Manager dialog box is used to display the other Bluetooth devices with which you can communicate. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.10 Bluetooth Icon...
Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio cov- erage range will be retrieved. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Bluetooth Setup...
Page 144
Note: The CH column shows the RFCOMM channel of the service if the service is RFCOMM-based. This information is not generally needed except for debugging purposes. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 145
Authentication enabled and does not have a required PIN set, an Authentication Request dialog box is displayed. • Enter the PIN, and tap on OK to connect the devices. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Bluetooth Setup...
(one at a time), but you have the freedom to switch on-the-fly. Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Note: You can change the device-name and description of your radio by clicking on the System icon in Control Panel, which will open the System Proper- Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Bluetooth Setup...
Name Query Retry governs the number of times the vehicle-mount will attempt to query the names of other Bluetooth devices if the first attempt fails. (When the unit scans for other devices, it sometimes fails to scan names.) Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
2. To set up the internet parameters, tap on the Network And Dial-up Connections icon in the Control Panel. Figure 5.11 Network And Dial-up Connection Icon 3. Tap on the Make New Connection icon. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Bluetooth Setup...
Page 150
6. In the dropdown menu labelled Select a modem:, choose the name of the modem with which you want to connect, and then tap on Configure to display the Device Properties dialog box. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 151
8. In the Modem dialog box, choose Next to display the Phone Number dialog box. The phone number you enter is network carrier dependent. Once you’ve specified all the necessary information, tap on Finish. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Bluetooth Setup...
Page 152
[ENTER] to save your changes. 11. At this point, you’ll need to return to the Control Panel and choose the Network and Dial-up Connections icon. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.12 Dialing Icon...
Once the onscreen message reads Connected, click on Hide and access the internet. 5.5.10 Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept. •...
Backup Profile. Profile Information This dialog box lists the possible storage destinations for the profile file. • To begin, type a name for the profile in the field labelled Profile Name. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 155
The location for the profile is either \Flash Disk or \SD-MMC Card. • Tap on Next to display the next dialog box – Add Files. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Total Recall...
Page 156
The Select Files option allows choose to limit the backup By Individual File, or you can choose to define which files will be backed up By File Type. • Tap on Next to view your selections Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Choose the Profile Name you want to restore from the Profile Name dropdown menu. Note: You can also manually restore an auto restore profile located in flash or a storage device. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Total Recall...
Tap the checkbox next to ‘Show Input Panel Button’. To remove this icon from the taskbar, tap in the checkbox to erase the check mark. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.15 Input Panel Icon Input Panel...
Page 159
Tap on the Input Panel icon in the Control Panel. • Tap on the Options button to change the appearance of your soft keyboard. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Soft Keyboard API And Rx/Tx LEDs Input Icon...
This internet protocol specification (version 6) supports 128-bit IP addresses, replacing version 4. • Tap on the icon to display the IPv6 Support dialog box. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 5.16 IPv6 Support Icon...
Figure 5.17 Teklogix Scanners Icon 5.5.13.1 Scanner Barcodes Important: To improve the decode speed and performance, enable only those codes that are required by the application. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Scanner Properties Setup...
If you need to change a yes or no value, double-tapping on the parameter toggles between yes and no. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Higher values significantly increase the time it takes to decode a bar code but also improve the reliability of the decoded bar code. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Scanner Properties Setup...
Note: If your unit is operating with the Psion Teklogix TESS application, this parameter should not be used in conjunction with the TESS AIAG feature.
Page 165
The ASCII/Unicode key value of the keypress is displayed. Pressing the [ESC] key in this dialog box resets the data to zero. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Note: The appended character is treated as any other keyboard character. For example, if [BKSP] is pressed, the usual action for that key is performed. If your unit is operating with the Psion Teklogix ANSI emulation application, the 8525 G2/8530 G2 transmits the escape sequence associated with the function immediately after the bar code data.
Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes. Include Country If this parameter is enabled (set to on), the country code is included with the decoded bar code data. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 168
When this window is displayed, press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed. Pressing the [ESC] key in this dialog box resets the data to zero. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Note: The appended character is treated as any other keyboard character. For example, if [BKSP] is pressed, the usual action for that key is performed. If your 8525 G2/8530 G2 is operating with the Psion Teklogix ANSI emu- lation application, the vehicle-mount transmits the escape sequence asso- ciated with the function immediately after the bar code data.
Refer to “Addendum” on page 144. Prefix/Suffix Chars See “Prefix/Suffix Chars” on page 144. 5.5.13.10 UPC E Settings Enabled Set this parameter to on to enable UPC E or off to disable it. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Setting this parameter to on strips the start and stop characters from this bar code. Field Size/Chars Refer to the description beginning on page 141 for details. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration Scanner Properties Setup...
If this parameter is set to Two Check Digits, it is assumed that the last two digits are check digits. Field Size/Chars Refer to the description beginning on page 141 for details. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
If this parameter is enabled (set to on), the check digit is included with the decoded bar code data. Field Size/Chars Refer to the description beginning on page 141 for details. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
If this parameter is enabled (set to on), the ITF-14/16 Mod10 check digit is calculated. Include Check If this parameter is enabled (set to on), the check digit is included with the decoded bar code data. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
8525 G2/8530 G2 following a double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed. Pressing the [ESC] key in this dialog box resets the data to zero. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 176
\Flash Disk\ScanLog.txt. Keep in mind that if this parameter is enabled, there is a slight performance effect when performing multiple scans because the log file is written to persistent storage. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
– the beginning of decoded bar code, the end of decoded bar code, the entire decoded bar code or anywhere within the decoded bar code (default). Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
This parameter determines the number of bits for the data going through this port. Double-tapping on this option displays a pop-up window in which you can choose either 7 or 8 data bits. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
5.5.13.22 Serial Port (COM 2) Enabled This parameter must be set to on in order for the 8525 G2/8530 G2 to recognize the device connected to the serial port. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 180
This parameter determines the number of bits for the data going through this port. Double-tapping on this option displays a pop-up window in which you can choose either 7 or 8 data bits. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
SNMP uses Management Information Bases (MIBs) that define the variables an SNMP Network Management Station can access. Each product has a defined set of MIBs that determine how SNMP operates, the type of access allowed and so on. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup All Psion Teklogix products support the TEKLOGIX-GENERIC-MIB – a MIB that defines some common features across Teklogix products. All devices also support MIB-II, a management information base that defines the common features of TCP/IP networks.
The value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs. Rights This menu allows you to specify access – that is, ‘Read-Only’ or Read-Write’ Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the managed node. This option allows you to define where the report will be sent. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 185
A dialog box like the one displayed when you add a destination is displayed. • Make the changes to the destination, and tap on OK to save the changes. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup...
SNMP queries from any host. Adding A Host To add a new host: • Tap on the Add button. • Type a new host IP address in the text box provided, and press [ENTER]. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 187
A dialog box like the one displayed when you add a host is displayed. • Make the necessary changes, and press [ENTER]. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup...
Page 189
6.3.7 8525 G2/8530 G2 Installation In Vehicles ....179 6.3.8 Wiring Vehicle Power To The 8525 G2/8530 G2 ..180 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual & A...
6.1 External Bar Code Readers 6.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners The 8525 G2/8530 G2 supports Psion Teklogix’ PowerScan™ industrial bar code scanner with standard, long range and extra long range options. To connect this scanner to the 8525 G2/8530 G2, attach the device to the tether port.
If you are unable to obtain suitable advice, contact Psion Teklogix for assistance (see "Appendix A: Support Services and Worldwide Offices" at the end of this document). Note also that for better protection, the equipment should be mounted inside the vehicle roll cage.
Screw Holes Quick Release Fasteners Figure 6.2 Mounting Cradle And Quick Release Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 6: Peripheral Devices & Accessories Installing The Cradle And Cradle Mounting Plate Mounting Kit PN 1008424 Adaptor Plate...
Page 194
Slide the fasteners on the back of the cradle until they snap to the posts on the mounting plate. Warning: Never operate the vehicle if the quick release fasteners are not locked. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 6.3 The Cradle Mounting Plate T ab Guides...
Failure to install the mount correctly or any attempt to modify the mount may result in serious injury or damage to property. Contact Psion Teklogix Technical Support or your Psion Teklogix represen- tative if you have problems installing this mount.
Installation tion, the mount may slowly ‘settle’. Occasional readjustment and tightening of the handscrew may be required. Psion Teklogix offers a tightening tool (PN 9000594) which can be used to minimize settling (see Figure 6.5). The platform on which you secure the vehicle-mount must be strong enough to support 25 kg.
Page 197
If you are assembling with RAM Vesa Base, see Figure 6.7 on page 174. • If you are assembling with RAM Circular Base, see Figure 6.8 on page 175. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 6: Peripheral Devices & Accessories Figure 6.6 Installation...
Page 198
RAM Vesa Base (E), the local platform and the washer (F). Affix with nut (N). Torque to 26 in-lbs. Secure RAM Standard Arm (H) by insert- ing RAM Balls in to both ends of arm sockets. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Figure 6.7 RAM Vesa Base...
Page 199
RAM Circular Base (J), the local platform and the washer (F). Affix with nut (N). Torque to 26 in-lbs. Secure RAM Standard Arm (H) by inserting RAM Balls in to both ends of sockets. Figure 6.8 RAM Circular Base Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
6.3.3.4 Component Part Numbers The table below lists the mounting component part numbers. Legend Item Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Description Mounting Bracket Washer M6 Internal Tooth Screw M6 x 12 Hex Head RAM Vesa Base...
Insert the screws into the side of the mounting cradle to secure the mount- ing plate to the cradle (PN 1080363). Mounting Cradle PN 1080363 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Chapter 6: Peripheral Devices & Accessories 8530 G2 Keyboard Mounting Options...
• Keep the cables away from heat sources, grease, battery acid, and other potential hazards. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual RAM Mount Kit PN 1008447 PN 9001932 Vesa Plate...
Use only a 10A slow blow UL approved fuse in the fuse assembly. The fuse assembly must be located as close as practical to the DC supply, and shall connect to the positive side of the DC supply. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
- Complies with European R & TTE Directive. * Note this product will carry the CE Mark. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 8525 G2/8530 G2 Vehicle-Mount Specifications -20° C to 60° C (-4° F to 140° F) -35°...
Antenna Port Transmit Power Frequency Range Channels RX Sensitivity Data Rates Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Compact Flash Single U.FL jack, no diversity 20mW 2.400 - 2.4835GHz 1 to 11 for USA, Canada 1-13 for EU countries...
Interface 7.5 Internal Lithium-Ion Battery Not user accessible. Technology Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Decoded and Non-Decoded 5V or 12V. (Refer to “Power” on page 156 for details.) Via tether port. 12.6V Lithium-Ion (Li-Ion) backup battery...
Technical Support for Mobile Computing Products is provided via email through the Psion Teklogix customer and partner extranets. To reach the website, go to www.psionteklogix.com, and click on the appropriate Teknet link on the home page. Then click on the “Login” button or the “Register” button, depending on whether you have previously registered for Teknet.
* CAUTION: If enabled (software configurable), 5V or 12V power will appear on this line, which may be the Ring Indicator line on some devices such as modems. 1/2 Amp Max. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual PPENDIX Description...
USB_DEVICE+ USB_DEVICE- P2_USB_HOST+ P2_USB_HOST- CONSOLE_RXD CONSOLE_TXD CONSOLE_TXD_SEL MOTION DETECT AUXILARY_PORT_ID Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Signal Type Notes Power 5 VDC @ 0.5 A maximum. Power 5 VDC (Tied to pin 1). Not used. Not used.
3V3 Standby 3V3 Switched EL Command Ground Ground Ground Ground Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual External Keyboard–High Density DB-26 (8530 G2 Only) Signal Type Notes Not used. Grounding this pin, together with removing & re-asserting power to the terminal puts the PCON in pro- gramming mode.
Page 218
No connect System Power System Power No connect Ground Ground No Connect Keyboard Detect IN Keyboard Detect Out Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Function Signal Type Notes Not used Heater Power Heater Power Not used Power...
C.1 USB Setup The USB Setup application is used to update a Windows PC so that it can connect to a Psion Teklogix 8525 G2/8530 G2. To download the USB Setup application, go to: www.psionteklogix.com/downloads This will take you to the Teknet home page.
– 3.5 or later. If the version installed on your PC is not supported, you’ll need to exit the USB Setup application, and install a later version of ActiveSync. ActiveSync can be downloaded from Microsoft at: http://www.microsoft.com/downloads. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
C.1.2 Installation Complete Dialog Box This dialog box indicates the success or failure of the installation. 4. Tap on Exit to exit the application. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual Appendix C: USB Setup Application Installation Complete Dialog Box...
Page 222
PC using a USB cable, and turn the unit on. If the USB Setup process was successful, the “Found new hardware” wizard may start. If this occurs, choose the recommended defaults. ActiveSync will detect your 8525 G2/ 8530 G2. Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual...
Page 223
86 keyboard 45 backup profile, creating (Total Recall) 130 backup profile, restoring (Total Recall) Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual INDEX Bad Scan Beep 152 bar code appending to 142, 145 connecting bar code reader 167...