The Properties Tab; The Bluetooth Gprs Wan Connection - Psion Teklogix Workabout PRO G2 User Manual

Chapter 5: Configuration

The Properties Tab

5.7.5 The Properties Tab

Properties
The
provides some port options.
The Device Name field shows the device name of your WORKABOUT PRO G2.
This name can be changed (see the Note on the previous page for details).
Device Class shows the Class of Device (e.g. desktop, hand-held), which is always
set to Handheld.
Local Bluetooth Address shows the address of your WORKABOUT PRO G2 radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set
to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.
NQuery Retry (Name Query Retry) governs the number of times the hand-held will
attempt to query the names of other Bluetooth devices if the first attempt fails.
(When the WORKABOUT PRO G2 scans for other devices, it sometimes fails to
scan names.)
Note: Keep in mind that setting this parameter to a higher value will lengthen
the scan time.

5.7.6 The Bluetooth GPRS WAN Connection

The following steps describe how to set up an internet data connection using a GSM
cellular telephone with Bluetooth. The WORKABOUT PRO G2 communicates via
Bluetooth to the cell phone, which then accesses a WAN (Wide Area Network) and
transfers data using GPRS.
118 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
tab displays information about your WORKABOUT PRO G2, and