Decoded (Internal) Advanced Options - Psion Teklogix Workabout PRO G2 User Manual

Chapter 5: Configuration
Decoded (Internal) Scanners
Laser On Time
The value assigned to this parameter determines how long the laser will remain on
when the scan button or trigger is pressed.Double-tapping on this parameter
displays a dialog box in which you can enter a value between
number representing

5.11.2.2 Decoded (Internal) Advanced Options

Continuous Scan Mode
Setting this parameter to 'on' keeps the laser on and continuously decoding as long
as the scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is
turned off, once the scanner trigger or button is released. This gives the scanner a
minimum amount of time to complete its current decode before the scan is cancelled
when the user quickly triggers on/off.
Low Power Timeout
To extend laser life, you can select the time the scanner remains active following a
successful decode. The scanner wakes from low power mode when a bar code is
scanned—a successful decode restores normal blinking.
This is only used if the unit's Trigger Mode has been changed to Continuous On. If
the unit is used in a fixed mount this parameter might be used, but not if the unit is
used as a hand-held.
When you double-tap on this parameter, a dialog box is displayed in which you can
choose a value of 30 sec., 1 min., 2 min. or 3 min.
Parameter Scanning
Setting this parameter to ON enables decoding of parameter bar codes.
Linear Security Level
This parameter allows you to select the security level appropriate for your bar code
quality. There are four levels of decode security for linear code types (e.g., Code 39,
Interleaved 2 of 5). Higher security levels should be selected for decreasing levels of
bar code quality. As security levels increase, the scanner's decode speed decreases.
138 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
. seconds.
0 1
and , each
5 99