Scu Tabs - Psion Teklogix Workabout PRO G2 User Manual

• Configure any other settings that are supplied by the network administrator
for the SSID to which you will associate.
• Make certain that you tap on Commit following each change.
Once you've completed the configuration:
• Tap the Main tab. Tap on the Active Config button – your new config will
be listed in the drop-down menu.
When you tap on the config you created, the RA2041 radio module attempts to
connect to the network using the following steps:
- Associate to the SSID.
- Authenticate to the network.
- If EAP authentication is being used, derive dynamic encryption keys.
- If DHCP is being used by the network, obtain an IP address.
If the RA2041 is not connecting properly:
• Tap on the Status tab.
The Status dialog box lists the IP and MAC addresses, and indicates the current state
of the radio, the signal strength, channel and so on.
You can also use the Status screen for DHCP renewal and ICMP Echo Requests
(Pings).
Important: For details about the Status dialog box, refer to "Status Tab" on
page 29.

2.5 SCU Tabs

This section provides a detailed description of each of the tabs available in the
SCU—Main (below), Config (page 20), Global Settings (page 26), Status (page 29),
and Diags (page 30).
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
Chapter 2: Basic Checkout

SCU Tabs

19