Ean 13 - Psion Teklogix Hand-Held Computer 7530 G2 User Manual

Chapter 5: Configuration
Non-Decoded Scanners

5.11.2.4 EAN 13

Enabled
Set this parameter to on to enable "EAN 13" or off to disable it.
Enable Bookland EAN
Setting this parameter to ON allows your scanner to recognize Bookland EAN
bar codes.
Include Country
If this parameter is enabled, the country code is included with the decoded bar
code data.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar
code data.
Addendum
Important:
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options:
Depending on the value chosen for this parameter, an addendum is recognized
or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When "Addendum" is set to Disabled
addendum. If this parameter is set to Optional
an addendum and if one exists, appends it to the main bar code. When the
parameter is set to Required
without an addendum.
Note: Setting 'Addendum' to Optional reduces performance. Optional
should only be selected if at least some of the bar codes being read
have addendums.
150 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Before "Addendum" can take effect, the "Short Code" parameter
(see page 146) must be enabled.
the scanner does not accept the main bar code
,
Disabled, Optional
the scanner does not recognize an
,
the scanner searches for
,
and .
Required