Main Tab; Config Tab - Psion Teklogix Workabout PRO G2 User Manual

Chapter 2: Basic Checkout

Main Tab

2.5.1 Main Tab

The Main tab is displayed when you tap on the Start>Programs>SCU icon.
• Enable/Disable Radio: Enables or disables the radio. This a toggle button;
when the radio is enabled, this button reads Disable Radio, and when the
radio is disabled, the button reads Enable Radio.
• Active Config: Lists the name(s) of the active configuration profile(s)
which are referred to as "configs". When a config is chosen from the Active
Config drop-down menu, the settings for that config become active.
If ThirdPartyConfig is selected, after the WORKABOUT PRO G2 goes
through a power cycle, WZC is used for configuration of the radio. See
"ThirdPartyConfig" on page 26 for details.
• Association Status: Indicates if the radio is associated to an access point. If
this is not the case, Association Status indicates the radio status.
• Software Version: This field displays the version of the device driver and
the SCU that are running on the WORKABOUT PRO G2.
• About Box: This box provides information about the SCU.

2.5.2 Config Tab

The Config tab allows you to define radio and security settings that are stored in the
registry as part of the configuration profile or config.
20 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
Figure 2.7 SCU Main Tab