Add And Edit Trigger Mapping - Psion Teklogix Workabout PRO G2 User Manual

Chapter 5: Configuration
Manage Triggers
OK
The OK button in the top right of the Manage Triggers screen saves all changes
made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all
changes made will be discarded.
5.6.6.2
These dialogs allow the user to add and edit trigger mappings.
Trigger Key
This dropdown list allows you to specify the source of the trigger events, such as the
Grip Trigger, Left Scan, etc., for the trigger module selected.
Notes: It is possible to map the same source to different modules (trigger con-
sumers)—for example, to both the Imager and Non-Decoded Scanner. If
so, both devices/operations will occur simultaneously. This is not recom-
mended in most cases, especially with devices such as Imagers or RFID
Readers.
It is also possible to map different sources to the same module (trigger
consumer)—for example, two different trigger keys can be mapped to the
RFID File System.
108 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual

Add And Edit Trigger Mapping