Properties Tab - Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual

Chapter 5: Configuration
Bluetooth Setup
ties dialog box. Click on the Device Name tab to access the menu and
change your settings. Then click on OK.
Although the name will have changed in the Properties menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take
effect, you must reset the 8525 G2/8530 G2.
5.5.9.5
The Properties tab displays information about your 8525 G2/8530 G2, and provides
some port options.
The Device Name field shows the device name of your 8525 G2/8530 G2. This
name can be changed (see the Note in this section for details).
Device Class shows the Class of Device (e.g. desktop), which is always set to
vehicle-mount.
Local Bluetooth Address shows the address of your 8525 G2/8530 G2 radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set
to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.
Name Query Retry governs the number of times the vehicle-mount will attempt to
query the names of other Bluetooth devices if the first attempt fails. (When the
unit scans for other devices, it sometimes fails to scan names.)
124 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual

Properties Tab