5.12 Restore Default
This command is used to restore the configuration with factory default settings.
Click [Yes] to proceed with the operation.
Note: IP and password configuration are not changed after this command..
5.13 Firmware Update
Firmware update operation is divided into several steps as follows:
1. Confirm update request.
2. Warning message is displayed.
3. Erasing flash (firmware code image) running messages:
Note:
http://192.168.0.177
is just an example. In real case it shows IP address of your device.
4. Browse and select the firmware image file for uploading after flash is erased completely.
-51-