Client Connection Failure Count
Auto Refresh
Manual Refresh
Clear
5.10 Ping
Ping utility is a helpful tool to troubleshoot problems in an IP network. It is a specific method for sending
messages from one device to another as part of troubleshooting IP network connections. A ping
test determines whether your device can communicate with another device across a network. In cases where
network communication is successfully established, ping tests also can determine the connection latency (a
technical term for connection delay) between the two devices.
Click
to save test parameters for future use.
Apply
Click
to start the ping test.
Start
5.11 Reboot System
This command is used to reboot, or called warm-start the device. New boot-up will make configuration
changes effective. Click
Connected. Remote IP is xx.xx.xx.xx
Wait for Disconnect
Counting the number that TCP client failed to connect TCP server
Update the status and counter every three seconds automatically.
Click to switch to
Manual Refresh
The status and counter display will not be updated.
Click to switch to
Auto Refresh
Reset the status and counter.
to proceed with the re-boot operation.
Reboot
.
.
-50-