System Host Configuration - KTI Networks KSC-361 User Manual

5.3 System Host Configuration

This page is used to show device information and configure the basic operating settings for authentication, IP
address, LAN port and Alarm relay.
Configuration
MAC Address
Software Version
Hardware Version
Name
Password
Confirm Password
IP Address
Subnet Mask
Default Gateway
DNS Server
IP Configuration Mode Static – Fixed IP mode
LAN Port Media Type
Description
Ethernet MAC address of the device
The revision number of the embedded firmware currently operating
The hardware version of the device
Name, as a logical identification, designated to this device
Password setting for Login authentication
Re-enter the password if it is changed.
The IP address designated to this device when static IP mode is used.
The IP subnet mask of this device
The IP address of the default gateway used by this device
The IP address of the DNS server used by this device
DHCP – Dynamic IP assigned by DHCP server
Auto – Auto detection for media, Use FX if an SFP transceiver is installed in slot,
-39-