Reboot System; Restore Default; Update Firmware - KTI Networks KTGC-221 Installation Manual

3.9 Reboot System

This menu is used to reboot the device remotely with current configuration. Starting this menu will make your
current http connection lost. You must rebuild the connection to perform any management operation to the unit.

3.10 Restore Default

This menu is used to restore all settings of the device unit with factory default values. Note that this menu
might change the current IP address of the device and make your current http connection lost.

3.11 Update Firmware

This menu is used to perform in-band firmware (software) upgrade. Enter the path and file name of new
firmware image file for uploading.
Configuration
Filename
Browser
Upload
Description
Path and filename (warp format)
Click to browse your computer file system for the firmware image file.
Click to start upload.
-31-