Ricoh U-C1 B051 Service Manual page 223

SERVICE PROGRAM MODE
Mode No.
6
(Class 1, 2, and 3)
009 ADF Free Run
1 ADF Free Run
010 ADF Stamp Position
1 ADF Stamp Position
016 ADF Size Change
1 ADF Size Change
050 Staple Position
1 Staple Position
117 Finisher Input Check
1 Entrance
2 Tray Exit
4 Staple Entrance
5 Stapler Home Position
Jogger Fence Home
6
Position
8 Feed-out Belt Home
Position
9 Stapler Tray Paper
Stapler Rotation Home
10
Position
11 Staple
14 Staple Sheet
Exit Plate Home
17
Position
18 Tray Shift Home
Position
21 Stack Height
23 Tray Lower Limit
35 Paper Limit
101 500 Fin Entrance
102 500 Fin Exit
103 500 Fin Jogger Home
Position
104 500 Fin Top Cover
105 500 Fin Height
106 500 Fin Lever
Function / [ Setting ]
Executes an ADF free run.
[0 ∼ 1 / 0 / 1 /step]
• 0: End
• 1: Start
Adjusts the stamp position of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Selects the paper size detected by the optional ADF
original sensors.
North America: [0 ∼ 1 / 0 / 1 /step]
Others: [0 ∼ 2 / 0 / 1 /step]
• 0: Regular
• 1: A4/LT
• 2: 8K/16K
Number 2, "8K/16K", is valid for the models of the
following regions: Europe, Asia. When number 2 is
selected, the following paper sizes are not detected: A3,
B4, A4, B5.
Adjusts the staple position of the optional finisher.
[–3.5 ∼ 3.5 / 0.0 / 0.5 mm/step]
Displays the signals received from sensors and switches
in the finisher.
See section 5.1.4
5-48
26 July 2002